KPM Gear Reducer

KPM Gear Reducer High quality aluminum alloy Less noiselower temperature increase Easy mounting, linking, high efficiency

KPM Gear Reducer 

Features:

KPM series helical-hypoid gear units is a new-generation of product developed by our company. With a compromise of advanced technology both at home and abroad, its main features are as follow:1). Driven by hypois gear, has big ratios.2). Large in output torque, high efficiency, energy saving and environmental protection3). Made of high-quqlity aluminum alloy,light in weight and nonrusting.4). Smooth in running and low in noise,can work long time in dreadful conditions.5). Good-looking in appearance, durable in service life and small in volume6).Suitable for all round installation, wide application and easy of use7). The mounting dimension of KPM series are compatible with RV series worm gear unit(A part of RV050 dimensions are different from KPM50)8). Modulaw and multistructure can meet the demands of various conditions.

Performance Parameter:

Contact to us, we will give you all the parameter of our product at once.

Application: 

RV Series apply to food, cooking machinery, printing machinery, carpentry machinery, small textile machinery, rubber machinery, small chemical machinery and plastic machinery.

Main materials:

1). Housing: die-cast aluminum alloy(frame size:50 to 90)2). gear wheel:20CrMnTiH1, carbonize& quencher heat treatment make the hardness of gear’s surface up to 56~62HRC,retain carburization layer’s thickness between 0.3 and 0.5mm after precise grinding.

Surface painting:Aluminum alloy housing1). Shot blasting and special antiseptic treatment on the aluminum alloy surface.2). After phosphating, spray the paint RAL9022 in silver white.

Installation Dimensions:

We have more models, pls feel free to contact to us for more information.

Usage specifications:1. Make sure that the reducer is located onto a flat and non-flexible surface and subject to any vibration be foreseen, it is advisable to fix the screw heads by means of cut washers.2. For outdoor applications provide suitabl protections against the atmosphere and direct precipitation. For applications in humid environments, provide appropriate protections onto the reducer machined surfaces.3. During mounting of pinions, couplings or pulleys onto the gearbox shafts, try to avoid any impact by using the appropriate pullers located in the threaded holes at the ends of the same shafts.4. When reducer starts to work up to 150 hours, its lubrication oil should be replaced. Afther that, the cycle of oil replacement is about 4000 hours.5. Lubricating oil should be kept enough in the casing and checked at a fixed time.6. Avoid mixing synthetic and mineral lubricants.

KPM Gear Reducer